Spray Nozzles for Iron And Steel industry
- TOP
- Spray Nozzles for Iron And Steel industry
Spray Nozzles for Iron And Steel Industry
-
Pneumatic spray nozzles for cooling continuous cast steel
- Features
- High impact spray, high cooling performance and energy-saving mist cooling nozzle.
- Large turn-down ratio of 1: 20 and minimal variation in spray angle. (DOVEA series)
- Large free passage diameter for minimal clogging.
- Delivering Results in,
- Slab continuous casting
- Bloom continuous casting
- Billet casting
- Cooling for continuous casting rollers
- Cooling for hot mill rollers
- Continuous annealing equipment
-
Convertible (Hydraulic / Pneumatic) spray nozzles for cooling continuous cast steel
- Features
- Energy saving mist nozzle for high-mix production.
- New concept dual-use mist nozzle used as hydraulic spray nozzle for mid/large spray capacity and used as pneumatic spray nozzle for small spray capacity.
- Large turn-down ratio of 1: 20 and minimal variation in spray distribution and spray angle.
- Enables reduction of compressed air usage by more than 80% compared with dedicated pneumatic spray nozzles.
-
Descaling nozzles
- Features
- From the unique tip structure, sprays a razor-like powerful stream.
- With small spray capacity, high impact spray is available.
- Water savings of 20% and prevention of over-cooling.
- Less wear with optimal tip structure.
- Delivering Results in,
- Rough rolling
- Finish rolling
- HSB
- HL
- Pre-descaling
-
- Features
- By rotating a handwheel, nozzles can be cleaned.
- The brush installed in the header thoroughly cleans the nozzle.
- The brush material is polypropylene. Low wear allows a long period of use.
- FRP header (Titanium nozzles) for acid liquid resistance is available.
- Delivering Results in,
- Continuous zinc plating
- Continuous acid cleaning
- Continuous annealing
