Spray Nozzles for Air Pollution Control
- TOP
- Spray Nozzles for Air Pollution Control
Spray Nozzles for Pollution Control Equipment Industry
-
High purity alumina nozzles for flue-gas desulfurization equipment
- Features
- Entire nozzle is made of alumina ceramic having excellent wear-resistance and corrosion resistance.
- Sutable for slurry spray such as lime-gypsum method and magnesium hydroxide method.
- AAP-AL92 series and AJP-AL92 series are designed with no whirler inside of the nozzles, providing large free passage diameter and minimizing clogging.
- Delivering Results in,
- Coal-fired power plants
- Iron and steel plant manufacturers
- Paper and pulp plant manufacturers
- Chemical plant manufacturers
- Water granulation equipment
- Cleaning towers
-
Spray nozzles for gas cooling
- Features
- Multistep atomization structure yields average droplet of 60 um, spray capacity of 700 l/hr at an air-water ratio of 100.(GBIM series).
- Reduces running cost with low air-water ratio operation.
- Ikeuchi provides a wide range of gas cooling nozzles such as fine atomization pneumatic nozzle (GBIM series), our best-selling superior cost performance pneumatic nozzle (GSIM, GSIM-T series) and high-pressure hydraulic return nozzles (GSPB series).
- GSPB series is a large spray capacity return nozzle with a spray capacity of 167 ~ 833 l/min.
- Delivering Results in,
- Waste incineration plants
- Glass plants
- Cement plants
- Waste heat redcovery plants
- Steel mills
-
SiC, SiSiC nozzles for flue-gas desulfurization equipment
- Features
- The ideal involute design produces stable spray under low water pressure.
- Uniting two nozzles into one body, the WTAA series bidirectional spray nozzles mean fewer units to install and reduced maintenance time.
- Nozzle materials are SiC (Silicon carbide) and SiSiC (Siliconized silicon carbide) having excellent wear-resistance and corrosion-resistance as well as being lightweight.
- Delivering Results in,
- Coal-fired power plants
- Iron and steel plant manufacturers
- Paper and pulp plant manufacturers
- Chemical plant manufacturers
- Water granulation equipment
- Cleaning towers
-
Spray units for dust suppression
- Features
- Suppress dust dispersion in a large room space.
- The photos at left show the actual site where the dust density was reduced by 90 %, from 1.63 mg/m2 to 0.15 mg/m2.
- GSIM series pneumatic nozzles are capable of dust suppression without significantly wetting the environment by spraying droplet size of 40 - 80 um in large volume swiftly.
- Delivering Results in,
- Industrial waste disposal
- Transfer on conveyer line
- Hopper inlet
- Iron and steel rolling
